Ibm Rs-485 Host Parameters - Motorola MP6000 Integrator Manual

2 - 44 MP6000 INTEGRATOR GUIDE

IBM RS-485 Host Parameters

IMPORTANT This chapter includes port address parameters only. For additional user preferences (including IBM
To select the IBM RS-485 port used, scan one of the bar codes listed in
NOTE 1. Scanning one of these bar codes enables the RS-485 interface on the MP6000.
2. The port numbers in
NOTE This guide includes limited parameter bar codes. For ALL MP6000 programming bar codes, refer to
MP6000 Bar Code Programming Guide (p/n 72E-172633-xx
IBM RS-485 Port Parameters
Table 2-9
IBM Port Addresses
None Selected (default)
Hand-Held Scanner Emulation (Port 9B)
Non-IBM Scanner Emulation (Port 5B)
Table Top Scanner Emulation (Port 17)
IBM Scale Port Addresses
None Selected (default)
Port 6A
Port 6B
Port 6E
the MP6000 Bar Code Programming Guide (p/n 72E-172633-xx).
Directives, refer to
Table 2-9
Parameter
are no longer physical ports on the IBM POS.
Page
Number
2-45
2-46
2-47
2-48
2-49
2-50
2-51
2-52
Table 2-9..
).
the