Sensormatic Manual Activation and Sensormatic Status Button
EAS Button
Figure 5-5
This button indicates the state of the Sensormatic EAS device. The LED is yellow/amber and can be on,
flashing, or off. See
Beeper and LED Indicators on page 5-20
Soft Reset Buttons
Soft Reset Buttons
Figure 5-6
A soft reset of the MP6000 can be initiated by pressing the Scale Zero and EAS buttons simultaneously for 10
seconds. A two second beep sounds, then a system reset is performed.
OPERATING THE SCANNER
for detailed indications.
5 - 5