Diagnostic LED/7-segment Display
7-segment Display
Figure 5-2
Figure 5-2
shows the internal 7-segment display which provides error and warning codes, scale legal parameters
and lead through help during scale calibration. It is visible inside the scanner's vertical window.
The 7-segment display is a one character display. Letter(s) and number(s) messages scroll one character at a
time through the display. When a message is completed, the display pauses for two seconds. The message
repeats continuously.
NOTE When there are no issues, a dash displays to show the 7-segment display is operational.
•
If the message is an error, or warning it repeats until the issue is resolved.
•
If the message is related to scale calibration it repeats until calibration is completed.
•
If the message is related to the CAL/PAR display it repeats until the inspector/tester releases the Scale
Zero button.
See
Appendix A, MAINTENANCE, TROUBLESHOOTING, AND ERROR CODES
messages.
OPERATING THE SCANNER
7-segment Display
for status and troubleshooting
5 - 3