2 - 12 MP6000 INTEGRATOR GUIDE
Connecting an RS-232 Interface
MP6000 Scanner Only or MP6200/6500 Scale with Single Cable Protocol
Use the RS-232 interface to connect the MP6000 to POS devices, host computers, or other devices with an
available RS-232 port (e.g., com port).
T
he MP6000 uses +/-6V RS-232 signal levels to accommodate long cable lengths, and increased noise
NOTE
immunity.
RS-232 Connections.
Figure 2-2
NOTE Interface cables vary depending on configuration.
Host Connections
Table 2-2
Port
POS
Unpowered USB
(p/n CBA-U51-S16ZAR)
RS-232
RS-232
AUX 2
AUX 1
Connection Options
Powered USB
(p/n CBA-U52-S16PAR)
RS-232
(p/n CBA-R51-S16ZAR)
12V
POS
DC
RS-485
(p/n CBA-M51-S16PAR)