Ethernet On-Line Dialog - Bosch IRIS-Net User Manual

IRIS-Net

Ethernet On-line Dialog

Element
Read All from Selected Devices
Load Amplifier Presets
Send All to Selected Devices
Save Amplifier Presets
RCM-24: Save Current DSP Settings to Reserved
User Memory U01
Connect only (data would not be synchronized)
Bosch Security Systems B.V.
Description
Name of the device. The checkbox in front of the name of a device
allows selecting the unit as a connecting device. A connection will
be established only with selected devices.
The IP address of the device in IRIS-Net. Connection fails, if the IP
address specified in IRIS-Net differs from the actual IP address of
the unit.
Indicates the current connection status of the device.
Reads all settings of connected device and transfers them to IRIS-
Net.
Additionally reads the presets of all connected Remote Amplifiers.
Writes the DSP configuration and all settings into memory of
connected devices.
Additionally writes the presets of all Remote Amplifiers.
Additionally writes the current DSP settings into the User Memory
U01 of all power amplifiers with RCM-24 Remote Control Module
installed.
No synchronization; i.e. data (DSP configuration, settings, presets)
is not transferred to the devices nor read from the devices.
User Manual
IRIS-Net | en 14
2017.05 | 3.20 | F.01U.119.956