Table of Contents
Advertisement
SERVICE MANUAL
Control Unit Components
Exhaust Fans
SCREW (4)
EXHAUST FAN
J121
PLATE
2–26
FRAME
SCREW (8)
H129_1905CCA
H129_1905CC
Warning
Dangerous Voltage.
[1] De-energize the LASER PRINTER.
[2] Remove the BACK CONTROL UNIT COVER.
If necessary, see the procedure on Page 2–2.
[3] Loosen the 14 SCREWS to remove the BACK
INSIDE COVER.
[4] Disconnect J121.
[5] Loosen the 4 SCREWS to remove the PLATE
from the FRAME.
[6] Remove the 8 SCREWS to remove the
EXHAUST FAN from the PLATE.
10FEB97 – SM3226-1
Advertisement
Table of Contents
