Table of Contents
Advertisement
Image Unit Components
Optical Unit
Warning
• Dangerous Voltage.
• Possible damage to eyes from invisible laser beam. Wear protective eyewear.
• Do not wear jewelry.
[5] De-energize the LASER PRINTER.
[6] Remove the BACK IMAGE UNIT COVER. If necessary, see the procedure on Page 2–3.
[7] Remove the TOP COVER. If necessary, see the procedure on Page 2–5.
J430
SM3226-1 – 10FEB97
USER
ACCESS
DOOR
SUPPLY
MAGAZINE
DOOR
RECEIVE
MAGAZINE
DOOR
H129_0701ACC
H129_0701AC
SCREW (5)
LASER DIODE
CONTROL
BOARD COVER
H129_0015ACB
H129_0015AC
[1] Energize the LASER PRINTER.
[2] Press the MAGAZINE DOOR OPEN/CLOSE
SWITCH.
[3] Open the RECEIVE MAGAZINE DOOR.
[4] Pull down the LATCH and open the USER
ACCESS DOOR.
[8] Disconnect J430.
[9] Loosen the 5 SCREWS to remove the LASER
DIODE CONTROL BOARD COVER.
Removals
2–29
Advertisement
Table of Contents
