Table of Contents
Advertisement
SERVICE MANUAL
Covers
Right, Left and Back Control Unit Covers
Warning
Dangerous Voltage.
[1] De-energize the LASER PRINTER.
[2] Loosen the 2 SCREWS for the COVER being removed by rotating each SCREW 90° counterclockwise.
[3] Pull out on the top of the COVER and lift the bottom of the COVER to disengage it from the LASER PRINTER.
[4] Remove the COVER.
SCREW (2)
RIGHT
CONTROL
UNIT
COVER
Front Control Unit Cover
FRONT CONTROL
UNIT COVER
2–2
SCREW (2)
SCREW (2)
BACK
CONTROL
UNIT
COVER
LEFT
CONTROL
UNIT
H129_0800ACB
H129_0800AC
COVER
LATCH (2)
Dangerous Voltage.
[1] De-energize the LASER PRINTER.
[2] Rotate each of the 2 SCREWS 30°.
[3] Disengage the FRONT CONTROL UNIT
[4] Lift up and remove the FRONT CONTROL
SCREW (2)
H129_0600ACA
H129_0600AC
Warning
COVER from the LATCHES.
UNIT COVER.
H129_0701ACA
H129_0701AC
10FEB97 – SM3226-1
Advertisement
Table of Contents
