Ds5600 Components; System Controller; Figure 1.2 Ds5600 Components, Single Dt3 System - Kodak Versamark DS5600 Series Operator's Manual

DS5600 Components

Monitor
Network hub
CS150 System Controller
DT3 print station cabinet
The DS5600 series has the following standard components:
• Kodak Versamark CS150 System Controller
• Network hub
• One printer or print station
• Printhead
• Umbilical
• Fluid containers
The system can include the following additional components:
System enclosure (same used for the Kodak Versamark DS5000
•
Series Printing Systems)
• Computer mounting shelf (used only on a Kodak Versamark DT3 Print
Station)
• Second, third, or fourth narrow-format printer
• Second DT3 print station.
Each printer or print station supports one printhead. Each printhead prints
one color. Spot color printing is supported using multiple printheads.
Printheads cannot be stitched.

System Controller

When the system does not include a DP5000 series printer (also called a
narrow-format printer), the CS150 is mounted on a DT3 print station.
Figure 1.2 shows the system components of a system that does not have
a narrow-format printer.
Figure 1.2 DS5600 components, single DT3 system
Chapter 1. Overview
DS5600 Components
Printhead
PC shelf
Umbilical
Operator Guide 13