Table of Contents
Advertisement
To Adjust:
[21] De-energize the LASER PRINTER.
[22] Remove the SUPPLY MAGAZINE OPEN/CLOSE ASSEMBLY. If necessary, see the procedure on
Page 2–42.
[23] Loosen the SCREW.
[24] Remove the front SHIMS to increase the distance. Remove the back SHIMS to decrease the distance.
[25] Install the SUPPLY MAGAZINE OPEN/CLOSE ASSEMBLY.
[26] Check that the adjustment is correct.
SM3226-1 – 10FEB97
Remove to
decrease
height.
Remove to
increase
height.
Electrical Adjustments
SCREW
SHIM
H129_5401DCA
H129_5401DC
5–73
Advertisement
Table of Contents
