Table of Contents
Advertisement
SERVICE MANUAL
Important
If installing a new OPTICAL UNIT, do the following steps.
MAIN MENU
1 Monitor Mode
4 System Params
2 System Logs
5 Debug Utility
3 Boards Diag
Enter Menu Item:
SYSTEM PARAMETERS MENU
1 Set Date/Time
2 System Statistics
3 System Config
Enter Menu Item:
SYSTEM STATISTICS
Actuation Counter: XXXX
Actuation Counter: XXXX
Laser on hours: 0
Laser on hours:
0
Select (R)epeat or (S)ave:
Select (R)epeat or (S)ave:
Complete
Hit any key to continue:
Note
For information about installing a UNIVERSAL OPTICAL UNIT, see "Installing a Universal Optical Unit" in the
Installation Instructions.
2–32
4 Show Software Ver
5 MMB Config
6 FILM Config
S
[15] Energize the LASER PRINTER.
[16] Use the PORTABLE COMPUTER to display the
CES Main Menu.
[17] Enter [4] for "System Params".
[18] Enter [2] for "System Statistics".
[19] Press [ENTER].
[20] Enter [0] for the number of Laser on hours.
[21] Select [S] to save.
[22] Press [ESC] 4 times to exit diagnostics.
10FEB97 – SM3226-1
Advertisement
Table of Contents
