2-Phase Pulse Motor Driver Boards (2Pmd) - Kodak Ektascan 1120 Service Manual

2-Phase Pulse Motor Driver Boards (2PMD)

Installation Notes
The LASER PRINTER has 2, 2-PHASE PULSE MOTOR DRIVER BOARDS (2PMD):
• the BEAM SPLITTER BOARD (2PMD-B)
• the SLIDE BASE MOTOR BOARD (2PMD-F)
• When replacing the BEAM SPLITTER BOARD, remove the HEAT SINK.
• When replacing the SLIDE BASE MOTOR BOARD, do not remove the HEAT SINK.
Install JUMPERS
[1] Check that the following JUMPERS are installed:
(a) BEAM SPLITTER BOARD
1. J1-1 to J1-2
2. J2-1 to J2-2
(b) SLIDE BASE MOTOR BOARD
1. J1-2 to J1-3
2. J2-1 to J2-2
2-PHASE PULSE MOTOR DRIVER BOARD (2PMD)
SM3226-1 – 10FEB97
J2
J1
Removals
HEAT SINK
H129_1704BCB
H129_1704BC
2–17