Table of Contents
Advertisement
SERVICE MANUAL
Supply Magazine Open/Close Assembly with Separation Unit
Caution
The SUCKER PADS must be in the up position.
[5] Remove the 3 SCREWS.
[6] Lift the SUPPLY MAGAZINE OPEN/CLOSE ASSEMBLY a small amount, and pull the unit out.
Caution
The assembly will contact the S-MAGAZINE DOOR LOCK SOLENOID if lifted too high.
J321
2–42
SUPPLY
MAGAZINE
OPEN/CLOSE
ASSEMBLY
H129_0036ACA
H129_0036AC
S-MAGAZINE
DOOR LOCK
SOLENOID
J320
S-MAGAZINE
DOOR LOCK SENSOR
[1] Remove the SUPPLY MAGAZINE.
Warning
Dangerous Voltage. Possible damage to eyes from
invisible laser beam.
[2] De-energize the LASER PRINTER.
[3] Remove the RIGHT IMAGE UNIT COVER. If
necessary, see the procedure on Page 2–3.
[4] Disconnect the following connectors from the
SUPPLY MAGAZINE OPEN/CLOSE
ASSEMBLY:
J320
J321
J322
J302
J303.
SCREW (3)
J322
J302
J303
H129_1908BCB
H129_1908BC
10FEB97 – SM3226-1
Advertisement
Table of Contents
