error=0
Enter Command:LDF
error=0
Enter Command:POF
SM3226-1 – 10FEB97
To Adjust:
[21] Rotate the POTENTIOMETER VR2 until the
voltage and waveform are correct.
[22] Enter [L] [D] [F] to turn off the Laser Diode.
[23] Enter [P] [O] [F] to turn off the Polygon Motor.
[24] Press [ESC] 3 times to exit diagnostics.
[25] Remove the OSCILLOSCOPE PROBE.
[26] Close the SEQUENCE BOARD SHIELD
COVER.
[27] Replace the BACK IMAGE UNIT COVER.
Electrical Adjustments
5–51