Table of Contents
Advertisement
TRANSPORT
ROLLER
SUPPLY
ROLLER
FLAG
POSITION
SENSOR
MONITOR MODE MENU
1 Motors
6 Seq Board Diag
2 Solenoids
7 Enter Commands
3 Relay
8 Set Beam-Splitter
4 Miscellaneous
9 Auto Sensor Test
5 Sensors
10 Semi-Auto Sensor Test
Enter Menu Item:
Input 'HLP' to know commands.
Enter command:
SM3226-1 – 10FEB97
SUPPLY
ROLLER
STOP
BRACKET
H129_4201CCB
H129_4201CC
[20] Check that the LED indicator on the underside of
the SUPPLY ROLLER POSITION SENSOR is
off.
Note
If the LED indicator is off after the previous step,
STOP, this procedure has been completed.
[21] Press the [ESC] key on the PORTABLE
COMPUTER 2 times to return to the MAIN
MENU.
[22] Manually, align the SUPPLY ROLLER shaft so
that the SUPPLY ROLLER rests against the
STOP BRACKET and TRANSPORT
ROLLERS. The ROLLER will remain in place.
[23] Enter [1] for "Monitor Mode".
[24] Enter [7] for "Enter Commands".
Electrical Adjustments
5–95
Advertisement
Table of Contents
