Table of Contents
Advertisement
CHT1 Supply Roller Position Sensor
Note
Do this procedure when:
replacing the SUPPLY ROLLER ASSEMBLY
replacing the SUPPLY ROLLER POSITION SENSOR
experiencing transportation film jams.
To Check:
[1] Install the PORTABLE COMPUTER. See "Using the Portable Computer" in the Diagnostic Section.
[2] Open the BACK IMAGE UNIT COVER. If necessary, see the procedure on Page 2–3
[3] Open the SLOW SCAN FAN ASSEMBLY.
[4] Energize the LASER PRINTER.
MAIN MENU
1 Monitor Mode
4 System Params
2 System Logs
5 Debug Utility
3 Boards Diag
6 Exit
Enter Menu Item:
MONITOR MODE MENU
1 Motors
6 Seq Board Diag
2 Solenoids
7 Enter Commands
3 Relay
8 Set Beam-Splitter
4 Miscellaneous
9 Auto Sensor Test
5 Sensors
10 Semi-Auto Sensor Test
Enter Menu Item:
SM3226-1 – 10FEB97
SLOW SCAN FAN ASSEMBLY
[5] Use the PORTABLE COMPUTER to display the
CES Main Menu.
[6] Enter [1] for "Monitor Mode".
Electrical Adjustments
H129_7814BCD
H129_7814BC
5–93
Advertisement
Table of Contents
