Table of Contents
Advertisement
SERVICE MANUAL
Supply Magazine Open/Close Assembly Components
Component
ELECTROMAGNETIC
PUMP
ELECTROMAGNETIC
VALVE
SUCTION DETECTING
MANIFOLD
S-MAGAZINE
WINDOW CLOSE
SENSOR
S-MAGAZINE
WINDOW OPEN
SENSOR
MOTOR
Separation Assembly
[1] Remove the SUPPLY MAGAZINE OPEN/CLOSE ASSEMBLY. If necessary, see the procedure on
Page 2–42.
[2] Disconnect the following CONNECTORS:
J330
J331
J332
J333
J334
[3] Remove the HOSE.
[4] Mark the SEPARATION ASSEMBLY with a line to indicate the correct position.
[5] Remove the 6 SCREWS to remove the SEPARATION ASSEMBLY from the SUPPLY MAGAZINE OPEN/
CLOSE ASSEMBLY.
2–44
Remove the HOSE and CONNECTOR before the ELECTROMAGNETIC
PUMP.
• Make a mark to indicate the position of the SENSOR BRACKET on the
FRAME before removing it.
• Remove this part when the SEPARATING ASSEMBLY is fastened to the
SUPPLY MAGAZINE OPEN/CLOSE ASSEMBLY.
• Make a mark to indicate the position of the SENSOR BRACKET on the
FRAME before removing it.
• Remove this part when the SEPARATION ASSEMBLY is fastened to the
SUPPLY MAGAZINE OPEN/CLOSE ASSEMBLY.
Remove this part when the SEPARATION ASSEMBLY is fastened to the
SUPPLY MAGAZINE OPEN/CLOSE ASSEMBLY.
Replacement Notes
10FEB97 – SM3226-1
Advertisement
Table of Contents
