Table of Contents
Advertisement
SERVICE MANUAL
Print Controller Board
Warning
Dangerous Voltage.
[1] De-energize the LASER PRINTER.
[2] Remove the FRONT CONTROL UNIT COVER. If necessary, see the procedure on Page 2–2.
Caution
Possible damage from electrostatic discharge.
[3] Disconnect the CONNECTOR from the PRINT CONTROLLER BOARD, located in SLOT 3 of the CARD
RACK.
[4] Remove the 2 SCREWS.
[5] Remove the PRINT CONTROLLER BOARD by sliding it forward.
PRINT
CONTROLLER
BOARD
2–10
CARD
RACK
H129_1702BCA
H129_1702BC
10FEB97 – SM3226-1
Advertisement
Table of Contents
