Table of Contents
Advertisement
SERVICE MANUAL
DRIVER BOARD
[27] Change the switch settings for each sensor by trial and error until the film-fogging problem is cleared. Use the
Flat Field procedure on Page 4–21 to check the image after setting the duty ratio.
[28] Check the receiver output voltage for PT1, PT2, or PT3 after changing the switch setting. See the procedure
on Page 5–9.
5–20
RSW1
RSW3
RSW2
H129_1710DCA
H129_1710DC
10FEB97 – SM3226-1
Advertisement
Table of Contents
