SERVICE MANUAL
R Transportation Roller Assembly
[1] Remove the OPTICAL UNIT, SLOW SCAN ASSEMBLY, OUTLET GUIDE PLATE ASSEMBLY and
RECEIVE MAGAZINE OPEN/CLOSE ASSEMBLY. See the procedures in this section if necessary.
[2] Loosen the 2 IDLER SPROCKET ASSEMBLY SCREWS.
[3] Remove the ROLLER CHAIN from the ROLLER SHAFT.
[4] Loosen the 4 SCREWS on the MOTOR BRACKET.
[5] Remove the MOTOR CHAIN from the GEAR.
[6] Remove the 4 SCREWS and 2 BEARING RETAINERS.
[7] Slide the ROLLER through the groove in the FRAME.
2–34
SCREW (4)
ROLLER CHAIN
MOTOR
BRACKET
MOTOR
CHAIN
BEARING
RETAINER (2)
SCREW (4)
IDLER SPROCKET
ASSEMBLY
SCREWS
H129_0030DCA
H129_0030DC
10FEB97 – SM3226-1