Power Management Control And Status Register; Pmcsr Bridge Support Extensions - Intel 21555 User Manual

Table 120. Power Management Control and Status Register
Bits [14:13] are loadable by serial ROM or are programmable by the local processor.
• Primary byte offset: E1:E0h
• Secondary byte offset: E1:E0h
Bit Name
1:0 PWR State
3:2 Reserved
4 DYN DATA
7:5 Reserved
8 PME_EN
12:9 DATA_SEL
14:13 Data Scale
15 PME Status R/W1TC
Table 121. PMCSR Bridge Support Extensions
• Primary byte offset: E2h
• Secondary byte offset: E2h
Bit Name
7:0 BSE
21555 Non-Transparent PCI-to-PCI Bridge User Manual
R/W Description
Power State. Reflects the current power state of the 21555. When an
unimplemented power state is written to this register, the 21555 completes
the write transaction, ignores the write data, and does not change the value
of this field. D0 and D3 are always implemented. Support of D1 and D2 is
determined by serial ROM preload.
R/W 00b : D0 (required)
01b : D1 (optional)
10b : D2 (optional)
11b : D3 (required)
Reset value is 00b
R Reserved. Read only as 00b.
Dynamic Data. Reads as 0 to indicate that the 21555 does not support
R
dynamic data reporting.
R Reserved. Read only as 000b.
PME# Enable. Read only as 0 when the PME Support bits are all 0.
Otherwise, this is a read/write bit.
• When 0, the 21555 will not assert p_pme_l.
R/W
• When 1, the 21555 is enabled to assert p_pme_l.
• Reset value is 0
Data Select. This register is enabled by loading a "1" for the PM Data
Enable function in the serial ROM. See
page 16-180. For values of 7:0, this register selects one of eight bytes of
data loaded by serial ROM to be placed in the power management data
R/W
register. For values of 15:8, a 0 is returned in the data register.
• When not enabled, this register always returns 0 when read.
• Reset value is 000b.
Data Scale. Indicates the scaling factor of the value in the power
management data register. Loadable by serial ROM.
R/(WS)
Reset value is 00b
PME Status. The 21555 sets this bit to a 1 when s_pme_l is asserted and
the PME# Support bit for the current power state is a 1. This corresponds to
when the 21555 would normally assert p_pme_l, but regardless of the state
of the PME_En bit.
Writing a 1 clears this bit. Writing a 0 has no effect.
Reset value is 0.
R/W Description
R Bridge Support Extensions. Read only as 00h.
List of Registers
"Serial Preload Sequence" on
187