4.
At the command prompt, enter
similar to figure 105.
The line
entered the actual numeric IP address or an alias name.
Figure 105.
Connecting as a Telnet Client
The Microsoft Telnet utility is available from the command prompt (you may need to install
the Telnet client on your PC first). Telnet allows you to input SIS commands to the DXP
switcher from the PC via the Ethernet link and the LAN.
Starting Telnet
Access the command prompt and start Telnet as follows:
1.
On the
2.
Click
OK
Figure 106.
Operating using Telnet
It is not the intention of this guide to detail all of the operations and functionality of Telnet.
However, some basic level of understanding is necessary for operating the DXP switcher via
Telnet.
ping IP address
reports the actual numeric IP address, regardless of whether you
Pinging ...
Ping Response
menu, enter
Start
telnet
. The computer returns a display similar to figure 106.
Telnet Screen
. The computer returns a display
in the
field.
Search
DXP HD 4K Series • Reference Information
104