Radius Client; Radius-Server Address - SMC Networks 2555W-AG2 User Manual

7
Command Line Interface

RADIUS Client

Remote Authentication Dial-in User Service (RADIUS) is a logon authentication
protocol that uses software running on a central server to control access for
RADIUS-aware devices to the network. An authentication server contains a
database of credentials, such as users names and passwords, for each wireless
client that requires access to the access point.
Command

radius-server address

radius-server port
radius-server key
radius-server retransmit
radius-server timeout
radius-server
port-accounting
radius-server
timeout-interim
radius-server
radius-mac-format
radius-server vlan-format
show radius
radius-server address
This command specifies the primary and secondary RADIUS servers.
Syntax
radius-server [secondary] address <host_ip_address | host_name>
• secondary - Secondary server.
• host_ip_address - IP address of server.
• host_name - Host name of server. (Range: 1-20 characters)
Default Setting
None
7-58
Table 7-11. RADIUS Client
Function
Specifies the RADIUS server
Sets the RADIUS server network port
Sets the RADIUS encryption key
Sets the number of retries
Sets the interval between sending authentication
requests
Sets the RADIUS Accounting server network port
Sets the interval between transmitting accounting
updates to the RADIUS server
Sets the format for specifying MAC addresses on the
RADIUS server
Sets the format for specifying VLAN IDs on the
RADIUS server
Shows the current RADIUS settings
Mode Page
GC 7-58
GC 7-59
GC 7-59
GC 7-60
GC 7-60
GC 7-61
GC 7-61
GC 7-62
GC 7-62
Exec 7-63