Connectivity Fault Management; Cfm Fault Table; Cfm Mp Table - D-Link xStack Reference Manual

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch WEB UI Reference Guide

Connectivity Fault Management

CFM Fault Table

This window will display the fault conditions detected by the MEPs on the Switch.
To view this window, click Monitoring > CFM > CFM Fault Table as shown below:
Parameter
MD Name:
MA Name:
Click Find to display connection faults for the specified MD and MA.

CFM MP Table

This window is used to browse the CFM port MP list on the Switch.
To view this window, click Monitoring > CFM > CFM MP Table as shown below:
The following parameters can be configured:
Parameter Description
Port The port to which the MAC address below corresponds.
Level (0-7) The MD level of the entry you wish to view.
Direction The direction of the MEP.
Inward indicates an inward facing MEP.
Outward indicates an outward facing MEP.
VLAN ID The VLAN identifier of the entry you wish to view.
Click Find to see the entry displayed in the table.
Figure 7 - 35. Browse CFM Fault MEP window
Description
Enter the maintenance domain name to display.
Enter the maintenance association name to display.
Figure 7 - 36. Browse CFM Port MP List window
240