802.1V Protocol Vlan Settings - D-Link xStack Reference Manual

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch WEB UI Reference Guide

802.1v Protocol VLAN Settings

The window allows the user to configure Protocol VLAN settings. The lower half of the window displays any previously
created settings.
To view this window, click L2 Features > 802.1v Protocol VLAN > 802.1v Protocol VLAN Settings:
The following fields can be set:
Parameter
Group ID
Group Name
VID (1-4094)
VLAN Name
802.1p Priority
Port List (e.g.: 1-6)
Search Port List
Figure 3 - 14. 802.1v Protocol VLAN Settings window
Description
Click the corresponding radio button to select a previously configured Group ID from the drop-
down menu.
Click the corresponding radio button to select a previously configured Group Name from the
drop-down menu.
Click the radio button to enter the VID. This is the VLAN ID that, along with the VLAN Name,
identifies the VLAN the user wishes to create.
Click the radio button to enter a VLAN Name. This is the VLAN Name that, along with the
VLAN ID, identifies the VLAN the user wishes to create.
This parameter is specified to re-write the 802.1p default priority previously set in the Switch,
which is used to determine the CoS queue to which packets are forwarded to. Once this field
is specified, packets accepted by the Switch that match this priority are forwarded to the CoS
queue specified previously by the user.
For more information on priority queues, CoS queues and mapping for 802.1p, see the QoS
section of this manual.
Select the specified ports you wish to configure by entering the port number in this field, or tick
the Select All Ports box.
This function allows the user to search all previously configured port list settings and display
them on the lower half of the table. To search for a port list enter the port number you wish to
view and click Find. To display all previously configured port lists on the bottom half of the
window click the Show All button, to clear all previously configured lists click the Delete All
button.
NOTE: For the current release of the DES-3200, users cannot specify a range of ports
for 802.1v. The current release only allows users to specify all ports.
74