Ethernet Oam Event Configuration - D-Link xStack Reference Manual

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch WEB UI Reference Guide

Ethernet OAM Event Configuration

To view this window, click L2 Features > Ethernet OAM > Ethernet OAM Event Configuration:
The following parameters can be set:
Parameter
From Port/To Port
Link Event
Link Monitor
Critical Link Event
Threshold
Window:
Notify
Click Apply to implement the changes made.
Figure 3 - 58. Ethernet OAM Event Configuration window
Description
Specified a range of ports to be configured.
Choose the type of Link Event, Link Monitor or Critical Link Event, to configure.
The option is used to configure ports Ethernet OAM link monitoring error symbols, error
frames, error frame period, and error frame seconds. Link monitoring function provides
a mechanism to detect and indicate link faults under a variety of conditions. OAM
monitors the statistics on the number of frame errors as well as the number of coding
symbol errors. If the number of error symbols or error frames is equal to or greater than
the specified threshold within the period specified by the Window option, and the event
notification state (Notify) is enabled, it generates an event to notify the remote OAM
peer.
Use the Link Monitor menu to define the type of link monitor, and set the threshold,
window and notifications status.
The Critical Event option refers to an unspecified criticial event. The Dying Gasp option
specifies detection of an unrecoverable event has occurred, such as a power failure of
the remote device.
Specify the number of error symbols, error frames, error frame period, or error frame
seconds in the period that is required to be equal to or greater than in order for the
event to be generated. Threshold value can range from 0 – 4294967295.
For error symbol and error frame, the available range is 1000 to 60000 ms and default
value 1000ms. For error frame period the range is 14881 to 89286000, the default value
is 148810 for FE port. For error frame seconds the range is 10000 to 900000, the
default value is 60000.
Specify to enable or disable the event notification. The default state is Enabled.
113