D-Link xStack Reference Manual page 198

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch WEB UI Reference Guide
Figure 6 - 78. CPU Access Rule List window for Ethernet example
To view the configurations for previously configured rules, click on the corresponding Show Details button, which will
display the following CPU Access Rule Detail Information window:
Figure 6 - 79. CPU Access Rule Detail Information window for Ethernet example
To create an IPv4 ACL, click Add CPU ACL Profile in the CPU Access Profile List window. This will open the Add
CPU ACL Profile window. Use the drop-down menu to select a Profile ID between 1 and 3, click the IPv4 ACL radio
button, and then use the drop-down menu to select a protocol ICMP, IGMP, TCP, UDP, or Protocol ID. Click Select
and the following window will appear (this window will vary depending on whether ICMP, IGMP, TCP, UDP, or
Protocol ID has been selected):
Figure 6 - 80. Add CPU ACL Profile window for IPv4 example
Click on the boxes near the top of the window, which will then turn red and reveal parameters for configuration. To
create a new entry, enter the appropriate information and click Create. To return to the CPU Access Profile List,
menu click <<Back.
197