802.1X Settings - D-Link xStack Reference Manual

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch WEB UI Reference Guide

802.1X Settings

To configure the 802.1X Settings, click Security > 802.1X > 802.1X Settings:
This window allows you to set the following features:
Parameter Description
802.1X Use the radio buttons to enable or disable 802.1X.
Auth Mode Choose the 802.1X authentication mode, Port Based, or MAC Based.
Auth Protocol Choose the authentication protocol, Local or RADIUS EAP.
From Port/To
Enter the port or ports to be set.
Port
QuietPeriod This allows you to set the number of seconds that the Switch remains in the quiet state following
(0-65535) a failed authentication exchange with the client. The default setting is 60 seconds.
SuppTimeout This value determines timeout conditions in the exchanges between the Authenticator and the
(1-65535) client. The default setting is 30 seconds.
ServerTimeout This value determines timeout conditions in the exchanges between the Authenticator and the
(1-65535) authentication server. The default setting is 30 seconds.
MaxReq (1-10) The maximum number of times that the Switch will retransmit an EAP Request to the client
before it times out of the authentication sessions. The default setting is 2.
TxPeriod This sets the TxPeriod of time for the authenticator PAE state machine. This value determines
Figure 5 - 19. 802.1X Settings window
149