Cfm Loopback Settings - D-Link xStack Reference Manual

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch WEB UI Reference Guide

CFM Loopback Settings

To view this window, click L2 Features > CFM > CFM Loopback Settings:
The fields that can be configured are described below:
Parameter
MEP Name:
MEP ID
MD
MA
MAC Address
LBMs Number
LBM Payload Length
LBM Payload Pattern
LBMs Priority
Click Apply to implement changes made.
Figure 3 - 66. CFM Loopback Settings window
Description
To enter the MEP name.
To enter the MEP ID.
To enter the maintenance domain name.
To enter the maintenance association name.
To enter the destination MAC address.
Number of LBMs to be sent. The default value is 4. The range is 1-65535.
The payload length of LBM to be sent. The default is 0.
An arbitrary amount of data to be included in a Data TLV, along with an indication
whether the Data TLV is to be included.
The 802.1p priority to be set in the transmitted LBMs. If not specified, it uses the
same priority as CCMs and LTMs sent by the MA.
121