L2 Features; Jumbo Frame - D-Link xStack Reference Manual
Des-3200 series layer 2 managed fast ethernet switch web ui reference guide
Hide thumbs
Also See for xStack:
- Reference manual (1284 pages) ,
- User manual (357 pages) ,
- Hardware installation manual (71 pages)
Table of Contents
Advertisement
xStack® DES-3200 Series Layer 2 Ethernet Managed Switch WEB UI Reference Guide
L2 Features
Jumbo Frame
802.1Q Static VLAN
Q-in-Q
802.1v Protocol VLAN
VLAN Trunk Settings
GVRP Settings
Asymmetric VLAN Settings
MAC-based VLAN Settings
PVID Auto Assign Settings
Port Trunking
LACP Port Settings
Traffic Segmentation
Layer 2 Protocol Tunneling Settings
IGMP Snooping
MLD Snooping Settings
Port Mirror
Loopback Detection Settings
Spanning Tree
Forwarding & Filtering
LLDP
Ethernet OAM
Connectivity Failure Management
ERPS Settings
The following section will aid the user in configuring Layer 2 functions for the Switch. The Switch includes various
functions all discussed in detail in the following section.
Jumbo Frame
This window will enable or disable the Jumbo Frame function on the Switch. The default is Enabled. When Enabled,
jumbo frames (frames larger than the standard Ethernet frame size of 1536 bytes) with a maximum size of 2048 bytes
can be transmitted by the Switch.
To view this window, click L2 Features > Jumbo Frame:
Click Apply to implement changes made.
Figure 3 - 1. Jumbo Frame window
60
Section 3
Advertisement
Table of Contents
