Snmp Group Table - D-Link xStack Reference Manual

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch WEB UI Reference Guide
Parameter
View Name
Subtree OID
View Type
To implement your new settings, click Apply. To delete an entry click the corresponding Delete button.

SNMP Group Table

An SNMP Group created with this table maps SNMP users (identified in the SNMP User Table window) or community
strings to the views created in the previous window.
To view this window, click Configuration > SNMP Settings > SNMP Group Table:
To delete an existing SNMP Group Table entry, click the corresponding Delete button.
The following parameters can be set:
Parameter
Group Name
Read View Name
Write View Name
Notify View Name
User-based
Security Model
Description
Type an alphanumeric string of up to 32 characters. This is used to identify the new SNMP
view being created.
Type the Object Identifier (OID) Subtree for the view. The OID identifies an object tree (MIB
tree) that will be included or excluded from access by an SNMP manager.
Select Included to include this object in the list of objects that an SNMP manager can
access. Select Excluded to exclude this object from the list of objects that an SNMP
manager can access.
Figure 2 - 33. SNMP Group Table window
Description
Type an alphanumeric string of up to 32 characters. This is used to identify the new SNMP
group of SNMP users.
Specify an SNMP group name for users that are allowed SNMP read privileges to the Switch's
SNMP agent.
Specify an SNMP group name for users that are allowed SNMP write privileges to the
Switch's SNMP agent.
Specify an SNMP group name for users that can receive SNMP trap messages generated by
the Switch's SNMP agent.
SNMPv1 - Specifies that SNMP version 1 will be used.
SNMPv2 - Specifies that SNMP version 2c will be used. The SNMPv2 supports both
41