D-Link xStack Reference Manual page 189

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch WEB UI Reference Guide
To view the configurations for a previously configured rule, click on the corresponding Show Details button, which will
display the following Access Rule Detail Information window:
Figure 6 - 65. Access Rule Detail Information window for IPv6 example
To create a Packet Content ACL, click Add ACL Profile in the Access Profile List window and then use the drop-
down menu to select a Profile ID between 1 and 512 and click the Packet Content ACL radio button. Click Select and
the following window will appear:
Figure 6 - 66. Add ACL Profile window for Packet Content example
Click on the boxes at the top of the table, which will then turn red and reveal parameters for configuration. To create a
new entry enter the correct information and click Create. To return to the Access Profile List window, click <<Back.
188