D-Link xStack Reference Manual page 174
Des-3200 series layer 2 managed fast ethernet switch web ui reference guide
Hide thumbs
Also See for xStack:
- Reference manual (1284 pages) ,
- User manual (357 pages) ,
- Hardware installation manual (71 pages)
Table of Contents
Advertisement
xStack® DES-3200 Series Layer 2 Ethernet Managed Switch WEB UI Reference Guide
Use the radio buttons at the top of the menu to enable or disable the DHCP Server Screening trap and log state. Set
the Illegal Server Log Suppression Duration time to 1 minute, 5 minutes (default) or 30 minutes. Click the Apply
button to apply the settings.
To configure per port screening settings, use the pull-down menus to configure the following parameters:
Parameter
From Port / To Port
State
After setting the previous parameters, click Apply to allow your changes to be implemented. The DHCP Port
Information Table shows which ports are enabled or disabled for DHCP Sever Screening.
Figure 5 - 44. DHCP Screening Port Settings
Description
A consecutive group of ports may be configured starting with the selected port.
Choose Enabled to enable the DHCP Server Screening function or Disabled to disable it.
The default is Disabled.
173
Advertisement
Table of Contents
