Stp Instance Settings - D-Link xStack Reference Manual
Des-3200 series layer 2 managed fast ethernet switch web ui reference guide
Hide thumbs
Also See for xStack:
- Reference manual (1284 pages) ,
- User manual (357 pages) ,
- Hardware installation manual (71 pages)
Table of Contents
Advertisement
xStack® DES-3200 Series Layer 2 Ethernet Managed Switch WEB UI Reference Guide
STP Instance Settings
The following window displays MSTIs currently set on the Switch.
To view the following table, click L2 Features > Spanning Tree > STP Instance Settings:
The following information can be set:
Parameter
MSTI ID
Priority
To modify an entry, click the Edit button.
To see the STP Instance Operational Status of a previously configured setting, click View. The following window will
be displayed:
Figure 3 - 45. STP Instance Settings window
Description
Displays the MSTI ID of the instance being modified. An entry of 0 in this field denotes the
CIST (default MSTI). This value is created in the MST Configuration menu (see above).
Values allowed for MSTI ID range from 1 - 8.
Enter the new priority in the Priority field. The user may set a priority value between 0 and
61440.
Figure 3 - 46. STP Instance Settings - View window
102
Advertisement
Table of Contents
