Menu Bar - D-Link xStack Reference Manual

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch WEB UI Reference Guide

Expand - To expand the SIM group in detail.

Add to group - Add a candidate to a group. Clicking this option will reveal the following dialog for the user
to enter a password for authentication from the Candidate Switch before being added to the SIM group.
Click OK to enter the password or Cancel to exit the window.

Property - To pop up a window to display the device information.

Menu Bar

The Single IP Management window contains a menu bar for device configurations, as seen below.
The five menus on the menu bar are as follows.
File

Print Setup - Will set the default printer properties.

Print Topology - Will print the topology map.

Preference - Will set display properties, such as polling interval, and the views to open at SIM startup.
Group

Add to group - Add a candidate to a group. Clicking this option will reveal the following dialog for the user
to enter a password for authentication from the Candidate Switch before being added to the SIM group.
Click OK to enter the password or Cancel to exit the window.

Remove from Group - Remove an MS from the group.
Device

Configure - Will open the web manager for the specific device.
View

Refresh - Update the views with the latest status.

Topology - Display the Topology view.
Figure 2 - 52. Input password window
Figure 2 - 53. Menu Bar of the Topology View
Figure 2 - 54. Input password window
54