Cfm Linktrace Settings - D-Link xStack Reference Manual

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch WEB UI Reference Guide

CFM Linktrace Settings

On this page the user can configure the CFM link track message.
To view this window, click L2 Features > CFM > CFM Linktrace Settings:
The fields that can be configured are described below:
Parameter
MEP Name
MEP ID
MD Name
MA Name
MAC Address
TTL
PDU Priority
Click Apply to implement changes made. Type the MEP Name or MA Name and MEP ID in the spaces provided and
click on Find to view details for the linktrace in the table below.
Click on the View Detail link to display the details of any listed CFM Linktrace set.
Figure 3 - 67. CFM Linktrace Settings window
Description
To enter the MEP name.
To enter the MEP ID.
To enter the maintenance domain name.
To enter the maintenance association name.
To enter the destination MAC address.
Link-trace message TTL value. The default value is 64. The range is 2-255.
The 802.1p priority to be set in the transmitted LTM. If not specified, it uses the same priority
as CCMs sent by the MEP.
122