Topology - D-Link xStack Reference Manual

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch WEB UI Reference Guide
After enabling the Switch to be a Commander Switch (CS), the Single IP Management folder will then contain four
added links to aid the user in configuring SIM through the Web, including Topology, Firmware Upgrade and
Configuration File Backup/Restore and Upload Log File.

Topology

The Topology window will be used to configure and manage the Switch within the SIM group and requires Java script
to function properly on your computer.
The Java Runtime Environment on your server should initiate and lead you to the Topology window:
The Topology window holds the following information under the Data tab:
Parameter Description
Device Name This field will display the Device Name of the switches in the SIM group configured by the user. If
no Device Name is configured by the name, it will be given the name default and tagged with the
last six digits of the MAC Address to identify it.
Remote Port Displays the number of the physical port on the MS or CaS that the CS is connected to. The CS
will have no entry in this field.
Speed Displays the connection speed between the CS and the MS or CaS.
Local Port Displays the number of the physical port on the CS that the MS or CaS is connected to. The CS
will have no entry in this field.
MAC Address
Displays the MAC address of the corresponding Switch.
Model Name Displays the full model name of the corresponding Switch.
Figure 2 - 43. Topology window
49