Remote Management - D-Link DSL-2741B User Manual

Section 3 – Configuration

REMOTE MANAGEMENT

This section allows you to enable/disable remote access to the router from the Internet. Remote access control allows you to configure access via
specific services. Most users will not need to change any of these settings.
To access the REMOTE MANAGEMENT setting window, click on the Remote Management button under the ADVANCED tab.
REMOTE MANAGEMENT SETTINGS
Check the Enable Remote Management check box
to enable the remote management.
Input the Remote Admin Port listened by the web UI
for the remote PC to browse.
Select the Remote Admin Inbound Filter to filter the
remote PCs who want to use remote management.
REMOTE ACCESS CONTROL
Select the management services which you want to
enable/disable on your LAN/WAN interface.
Click on the Apply Settings button to apply settings.
Notice: If you disable HTTP service, you'll not be able
to access the router's configuration window
permanently.
D-Link DSL-2741B User Manual 61