D-Link xStack Reference Manual page 26

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch WEB UI Reference Guide
Parameter
Server ID
Severity
Server IP Address
Facility
UDP Port
(514 or 6000-65535)
Status
To add a new entry, enter the appropriate information and click Apply.
Description
Syslog server settings index (1-4).
This drop-down menu allows you to select the level of messages that will be sent. The options
are Warning, Informational, and All.
The IP address of the Syslog server.
Some of the operating system daemons and processes have been assigned Facility values.
Processes and daemons that have not been explicitly assigned a Facility may use any of the
"local use" facilities or they may use the "user-level" Facility. Those Facilities that have been
designated are shown in the following: Bold font indicates the facility values that the Switch is
currently employing.
Numerical Facility Code
0 kernel messages
1 user-level messages
2 mail system
3 system daemons
4 security/authorization messages
5 messages generated internally by
syslog line printer subsystem
network news subsystem
7
UUCP subsystem
8
clock daemon
9
security/authorization messages
10
FTP daemon
11
Type the UDP port number used for sending Syslog messages. The default is 514.
Choose Enabled or Disabled to activate or deactivate.
Numerical
12
13
14
15
16
17
18
19
20
21
22
23
25
Facility Code
NTP subsystem
log audit
log alert
clock daemon
local use 0 (local0)
local use 1 (local1)
local use 2 (local2)
local use 3 (local3)
local use 4 (local4)
local use 5 (local5)
local use 6 (local6)
local use 7 (local7)