®
xStack
DGS-3200 Series Layer 2 Managed Gigabit Ethernet Switch Web UI Reference Guide
Click the Add button to add a new entry based on the information entered. Click the Delete button to remove the specific entry.
DNS Resolver Dynamic Host Name Table
This window displays the current host name entries.
To view the following window, click Network Application > DNS Resolver > DNS Resolver Dynamic Host Name Table:
PPPoE Circuit ID Insertions Settings
This window is used to configure the PPPoE circuit ID insertion function.
To view the following window, click Network Application > PPPoE Circuit ID Insertions Settings:
The following parameter may be configured:
Parameter
PPPoE circuit ID
Insertion
From Port / To Port
State
Circuit ID
Figure 8 - 20. DNS Resolver Dynamic Host Name Table window
Figure 8 - 21. PPPoE circuit ID Insertions Settings window
Description
Click the radio buttons to enable or disable the PPPoE circuit ID insertion on the Switch.
Use the drop-down menus to select a range of ports to be configured.
Use the drop-down menu to enable or disable port's PPPoE circuit ID insertion function.
Use the drop-down menu to select the device ID part for encoding of the circuit ID option.
242