®
xStack
DGS-3200 Series Layer 2 Managed Gigabit Ethernet Switch Web UI Reference Guide
OAM
Ethernet OAM
DULD Settings
Cable Diagnostics
Ethernet OAM
Ethernet OAM Settings
This window is used to configure the Ethernet OAM settings.
To view the following window, click OAM > Ethernet OAM > Ethernet OAM Settings:
The following parameters can be configured:
Parameter
Description
From Port / To Port
Select a range of ports you wish to configure.
Mode
Use the drop-down menu to select to operate in either Active or Passive. The default mode is
Active.
State
Use the drop-down menu to enable or disable the OAM function.
Figure 9 - 1. Ethernet OAM Settings window
248
Section 9