Dns Resolver Dynamic Host Name Table; Pppoe Circuit Id Insertion Settings (Ri And Ei Mode Only) - D-Link xStack DGS-3120 Series Reference Manual

xStack® DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Host Name
IP Address
IPv6 Address
Click the Add button to add a new entry based on the information entered.
Click the Delete button to remove the specific entry.

DNS Resolver Dynamic Host Name Table

This window displays the current host name entries.
To view this window, click Network Application > DNS Resolver > DNS Resolver Dynamic Host Name Table as
shown below:
PPPoE Circuit ID Insertion Settings (RI and EI Mode
Only)
This window is used to configure the PPPoE circuit ID insertion function.
To view this window, click Network Application > PPPoE Circuit ID Insertion Settings as shown below:
Figure 9-28 DNS Resolver Static Host Name Settings window
Description
Enter the name of the host.
Click and enter the IP address of the host.
Click and enter the IPv6 address of the host.
Figure 9-29 DNS Resolver Dynamic Host Name Table window
416