D-Link xStack Reference Manual page 186

®
xStack DGS-3200 Series Layer 2 Managed Gigabit Ethernet Switch Web UI Reference Guide
Parameter
Method
Trap State
Log State
RADIUS Authorization
Password Type
Password
Max User (1-4096)
Local Authorization
Click the Apply button in the second section to implement the configuration changes.
Configuring the Guest VLAN Settings:
Parameter
VLAN Name
VID (1-4904)
Member Ports (e.g.: 1-5, 9)
Click the Add button to create a new entry.
Click the Delete button in the third section to delete the Guest VLAN configuration.
Configuring MAC Settings Configuration on Ports:
Parameter
From Port / To Port
State
Aging Time (1-1440)
Block Time (0-300)
Max User (1-4096)
Description
Use this drop-down menu to choose the type of authentication to be used when
authentication MAC addresses on a given port. The user may choose between the
following methods:
Local – Use this method to utilize the locally set MAC address database as the
authenticator for MAC-based Access Control. This MAC address list can be configured in
the MAC Local Settings window.
RADIUS – Use this method to utilize a remote RADIUS server as the authenticator for
MAC-based Access Control. Remember, the MAC list must be previously set on the
RADIUS server and the settings for the server must be first configured on the Switch.
Use the drop-down menu to enable or disable sending out the trap for MAC-based Access
Control.
Use the drop-down menu to enable or disable log state.
Use the drop-down menu to enable or disable the use of RADIUS Authorization.
Use the drop-down menu to select the password type. Available options are Manual
String and Client MAC Address.
Enter the password for the RADIUS server, which is to be used for packets being sent
requesting authentication. The default password is "default".
Enter the maximum amount of users of the Switch. Tick the No Limit check box to have
unlimited users.
Use the drop-down menu to enable or disable the use of Local Authorization.
Description
Enter the name of the previously configured Guest VLAN being used for this function.
Click the button and enter a Guest VLAN ID.
Enter the list of ports that have been configured for the Guest VLAN.
Description
Use the drop-down menus to select a range of ports.
Use this drop-down menu to enable or disable MAC-based Access Control on the port or
range of ports selected in the Port Settings section of this window.
Enter a value between 1 and 1440 minutes. The default is 1440. Tick the adjacent Infinite
checkbox to disable aging.
Enter a value between 0 and 300 seconds. The default is 300.
Enter the maximum amount of users of the Switch. Tick the No Limit check box to have
unlimited users. The default is 200.
172