®
xStack
DGS-3200 Series Layer 2 Managed Gigabit Ethernet Switch Web UI Reference Guide
DHCP Server Pool Settings
This window is used to add and delete the DHCP server pool.
To view the following window, click Network Application > DHCP Server > DHCP Server Pool Settings:
The following parameters may be configured:
Parameter
Pool Name
Click the Add button to add a new entry based on the information entered. Click the Delete All button to remove all the entries
listed. Click the Edit button to re-configure the specific entry. Click the Delete button to remove the specific entry.
Click the Edit button to see the following window:
The following parameters may be configured:
Parameter
IP Address
Netmask
NetBIOS Node Type
Domain Name
Boot File
Figure 8 - 8. DHCP Server Pool Settings window
Description
Enter the DHCP Server Pool name.
Figure 8 - 9. DHCP Server Pool Settings – Edit window
Description
Enter the network address of the pool.
Enter the Netmask for the network address.
NetBIOS node type for a Microsoft DHCP client.
Domain name of client. The domain name configured here will be used as the default
domain name by the client.
File name of boot image. The boot file is used to store the boot image for the client. The boot
image is generally the operating system the client uses to load. If this option is input twice for
236