Dns Resolver Dynamic Host Name Table; Rcp Server Settings - D-Link xStack DGS-3420 Series Reference Manual

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Host Name
IP Address
Click the Add button to add a new entry based on the information entered.
Click the Delete button to remove the specific entry.

DNS Resolver Dynamic Host Name Table

This window displays the current host name entries.
To view this window, click Network Application > DNS Resolver > DNS Resolver Dynamic Host Name Table as
shown below:

RCP Server Settings

This window is used to configure global RCP server information. This global RCP Server setting can be used when
the Server or remote user name is not specified. Only ONE RCP server can be configured per system. If user does
not specify the RCP Server in the CLI command, and global RCP Server was not configured, the Switch will ask
user to input the Server IP address or remote user name while executing the RCP commands.
To view this window, click Network Application > RCP Server Settings as shown below:
The fields that can be configured are described below:
Parameter Description
IP Address
The IP address of global RCP Server. By default, the server is unspecified.
User Name The remote user name for logon into global RCP Server. By default, global server's remote
user name is unspecified.
Click the Apply button to accept the changes made.
Click the Edit button to re-configure the specific entry.
Click the Delete button to remove the specific entry.
Description
Enter the name of the host.
Enter the IP address of the host.
Figure 9-34 DNS Resolver Dynamic Host Name Table window
Figure 9-35 RCP Server Settings Window
327