Sntp Settings; Time Settings; Time Zone Settings - D-Link xStack Reference Manual

®
xStack DGS-3200 Series Layer 2 Managed Gigabit Ethernet Switch Web UI Reference Guide

SNTP Settings

SNTP or Simple Network Time Protocol is used by the Switch to synchronize the clock of the computer.

Time Settings

Users can configure the time settings for the Switch.
To view the following window, click Network Application > SNTP Settings > Time Settings:
The following parameters can be set or are displayed:
Parameter
SNTP State
Current Time
Time Source
SNTP First Server
SNTP Second Server
SNTP Poll Interval In
Seconds (30-99999)
Date (DD/MM/YYYY)
Time (HH:MM:SS)
Click Apply to implement your changes.

Time Zone Settings

Users can configure time zones and Daylight Savings Time settings for SNTP.
To view the following window, click Network Application > SNTP Settings > Time Zone Settings:
Figure 8 - 23. Time Settings window
Description
Use this radio button to enable or disable SNTP.
Displays the Current Time.
Displays the time source for the system.
SNTP Settings
The IP address of the primary server from which the SNTP information will be taken.
The IP address of the secondary server from which the SNTP information will be taken.
The interval, in seconds, between requests for updated SNTP information.
Set Current Time
Enter the current day, month, and year to update the system clock.
Enter the current time in hours, minutes, and seconds.
Status
244