Mac-Based Vlan Settings; Private Vlan Settings - D-Link xStack Reference Manual

®
xStack DGS-3200 Series Layer 2 Managed Gigabit Ethernet Switch Web UI Reference Guide
Ingress Checking
Acceptable Frame
Type
Click Apply to implement changes made.

MAC-based VLAN Settings

Users can create new MAC-based VLAN entries and search, edit, and delete existing entries. When an entry is created for a port,
the port will automatically become the untagged member port of the specified VLAN. When a static MAC-based VLAN entry is
created for a user, the traffic from this user will be able to be serviced under the specified VLAN regardless of the authentication
function operating on this port.
To view the following window, click L2 Features > VLAN > MAC-based VLAN Settings:
The following fields can be set:
Parameter Description
MAC Address Specify the MAC address to be reauthenticated by entering it into the MAC Address field.
VID (1-4094) Click this button and enter the VLAN ID.
VLAN Name
Enter the VLAN name of a previously configured VLAN.
Click Find to search for the information entered. Click Add to add the entry. Click View All to see all the entries. Click Delete
All to remove all the entries. Click Delete to remove the specific entry.

Private VLAN Settings

The Switch allows users to create private VLANs. A private VLAN divides the Layer 2 broadcast domain of a VLAN into
subdomains and are particularly useful for service providers who need to assign a unique VLAN to each of their customers. Each
subdomain is made up of several pairs of private VLANs, with each private VLAN pair consisting of a primary and secondary
VLAN. All of the VLAN pairs in a private VLAN domain are members of the same primary VLAN. Each subdomain is identified
using the secondary VLAN ID.
The diagram below illustrates the structure of a Private VLAN domain:
This drop-down menu allows the user to enable the port to compare the VID tag of an
incoming packet with the PVID number assigned to the port. If the two are different, the port
filters (drops) the packet. Disabled disables ingress filtering. Ingress checking is Enabled by
default.
This field denotes the type of frame that will be accepted by the port. The user may choose
between Tagged Only, which means only VLAN tagged frames will be accepted, and All,
which mean both tagged and untagged frames will be accepted. All is enabled by default.
Figure 3 - 11. MAC-based VLAN Settings window
61