D-Link xStack Reference Manual page 71

®
xStack DGS-3200 Series Layer 2 Managed Gigabit Ethernet Switch Web UI Reference Guide
To create a VLAN Batch entry click the VLAN Batch Settings tab, as shown below.
The following fields can be set in the VLAN Batch Settings windows:
Parameter
VID List (e.g.: 2-5)
Advertisement
Port List (e.g.: 1-5)
Tagged
Figure 3 - 6. Find VLAN tab of the 802.1Q VLAN window
Figure 3 - 7. VLAN Batch Settings tab of the 802.1Q VLAN window
Description
Enter a VLAN ID List that can be added, deleted or configured.
Enabling this function will allow the Switch to send out GVRP packets to outside sources,
notifying that they may join the existing VLAN.
Allows an individual port list to be added or deleted as a member of the VLAN.
Specifies the port as 802.1Q tagged. Use the drop-down menu to designate the port as
tagged.
57