Umb_Cast (Rx) - D-Link xStack Reference Manual

®
xStack DGS-3200 Series Layer 2 Managed Gigabit Ethernet Switch Web UI Reference Guide
Record Number
Bytes
Packets
Unicast
Multicast
Broadcast
Show/Hide
Click the Apply button to accept the changes made. Click the Clear button to clear all statistics counters on this window. Click
the View Table link to display the information in a table rather than a line graph. Click the
information in a line graph rather than a table.

UMB_Cast (RX)

To select a port to view these statistics for, select the port by using the Port drop-down menu. The user may also use the real-time
graphic of the Switch at the top of the web page by simply clicking on a port.
To view the following windows, click Monitoring > Packets > UMB_Cast (RX):
Figure 10 - 10. UMB_Cast (RX) window (for Unicast, Multicast, and Broadcast Packets)
To view the UMB_Cast (RX) Table window, click the
Select number of times the Switch will be polled between 20 and 200. The default value is
200.
Counts the number of bytes received on the port.
Counts the number of packets received on the port.
Counts the total number of good packets that were received by a unicast address.
Counts the total number of good packets that were received by a multicast address.
Counts the total number of good packets that were received by a broadcast address.
Check whether to display Bytes and Packets.
View Table link.
260
View Graphic link to display the