Mld Snooping Group; Mld Snooping Forwarding Table - D-Link xStack Reference Manual

®
xStack DGS-3200 Series Layer 2 Managed Gigabit Ethernet Switch Web UI Reference Guide

MLD Snooping Group

This window is used to display MLD Snooping Groups present on the Switch. MLD Snooping is an IPv6 function comparable to
IGMP Snooping for IPv4.
To view the following window, click L2 Features > L2 Multicast Control > MLD Snooping > MLD Snooping Group:
The following parameters can be configured:
Parameter
VLAN Name
VID List
Port List
Group IPv6 Address
Data Driven
Click the Find button to locate a specific entry based on the information entered. Click Clear Data Driven to delete the specified
IGMP snooping group learned by the data-driven mechanism. Click View All to see all the entries. Click Clear All Data Driven
to delete all the IGMP snooping groups learned by the data-driven mechanism.

MLD Snooping Forwarding Table

This window is used to display the switch's current MLD snooping forwarding table. It provides an easy way for user to check the
list of ports that the multicast group comes from and specific sources that it will be forwarded to. The packet comes from the
source VLAN. They will be forwarded to the forwarding VLAN. The MLD snooping further restricts the forwarding ports.
To view the following window, click L2 Features > L2 Multicast Control > MLD Snooping > MLD Snooping Forwarding
Table:
The following parameters can be configured:
Parameter Description
VLAN Name The name of the VLAN for which you want to view MLD snooping forwarding table information.
Figure 3 - 44. MLD Snooping Group window
Description
The VLAN name of the multicast group.
The VID list of the multicast group.
Specify the port number(s) used to find a multicast group.
Enter the IPv6 address.
Tick to display data-driven IGMP snooping group entries.
Figure 3 - 45. MLD Snooping Forwaring Table window
82